Shark steam iron
23 Place the iron in upright position and let it cool down. 22 Release the steam lever and it will automatically go to “ ”. Don’t touch the hot surfaces, water or steam because injury may occur. 20 Repeat step 19 until the impurities and scale are washed away.
Use caution when doing this as the water and the steam are hot enough to cause burns. Boiling water and steam will now be ejected from the holes in the soleplate. Pr ess and hold the V ariable Steam/Self Clean Lever all the way down to the SELF CLEAN position. The LED Indicator Light will turn green again when the iron reaches the selected temperature.ġ8 Hold the iron horizontally over the sink. If you wish to change the temperature, the LED Indicator Light will start to flash to show that the iron is either heating up or cooling down. 6 The LED Indicator Light above the selected temperature will flash and then will become green once the selected temperature is reached. 5 Set the desired ironing temperature by turning the Fabric Selector Dial. The LED Indicator Light below the Power on the Fabric Selector Dial will light up. 4 Plug in the iron into any 120V AC polarized electrical outlet. Make sure the water inlet cover is closed to avoid spilling while in use. USING YOUR IRON 3 Pour water carefully into the water tank without going over “MAX” line. The odor is safe and should not re-occur after the initial heating. This is because the materials used in making the iron are heating up. 2 When you turn on the iron for the first time it might emit an odor for the first ten minutes. BEFORE FIRST TIME USE 1 Before using your iron for the first time, please remove all the packaging material.